Approx. Rs 5,000 / Piece
Approx. Rs 10,000 / Unit(s)
Approx. Rs 10,000 / Unit
Approx. Rs 80,000 / unit
Our S.S sizing & drying cylinders are mirror polished from outside surface with the thickness of 16Swg (1.5mm) to 10Swg (3mm) of the cylinder sheet. The eccentricity should not exceed - 1.25. Maintaining the balance of these S.S sizing & drying cylinders is of great importance which is ensured by its following specifications:
v Roller length: 48" (1220 upto 141" (3600)
v Hydrolic test pressure 125 PRI to 150 PRI
v Dishend diameter: 22"/560 30"/762 31"/800
Approx. Rs 50,000 / Unit
We offer cooling dryer cylinders made from high quality material which can easily handle the flake form. It demands for low power and requires operating on a continuous basis. The installation is compact and hence easy to operate. Other features and uses of cooling dryer cylinders are:
v Melts with wetting property to metal surface, can be flaked
v Closed construction available
v Minimize vapour nuisance
v Avoid dust contamination
v Maintains low RH air blanketing
v For inert gas blanketing
v For maintenance of suction conditions for purposes of operator comfort
Approx. Rs 30,000 / unit
We manufacture Rubber Belts for controlled compressive shrinking process. We ensure high degree of performance with longer working life, minimal maintenance at a real convincing economical equation.
v Inside circumference: 3962 mm
v Usual Thickness: 50, 67, 70 and 72 mm
- Thickness Tolerence: 2 mm / -1 mm (without tension on the belt)
v Width Tolerence: 20 mm / -10 mm (without tension on the belt)
v Available in two primary durometer readings to suit specific applications:
v Rubber Belt (38 /-3 ShA) - is specifically designed for applications requiring maximum shrinkage such as denim.
v The lower durometer belt offers better recoil and a better grip on the fabric to enable greater shrinkage. This extra shrinkage is obtainable with less rubber belt compression. This translates into longer life and reduced cost.
v Rubber Belt (39-41 Shore A) - is ideal for all-purpose applications where high shrinkage and "hand" fabrics are run.
v 2.58" (67 mm) - is typically used to shrink medium to heavy weight fabrics.
v 2" (51 mm) - is used primarily to impart a softness or "hand" to fabric; with light to medium weight fabrics; and on "Comfit" machines to shrink knitted fabrics.
v Customers' special requests are accepted.
v Rubber Belts are manufactured with latest technology with extreme quality check.
v Superior Manufacturing Process helps to eliminate air pockets and blisters.
v Better Resistance to Cracking and Tearing.
v Better resistance to Stretching.
v Inner Surface - Exceptionally smooth to resist abrasion.
v Ensures less accidental damage to Rubber Belt during inspection and unloading.
Approx. Rs 10,000 / Unit
With rich industry experience and conformity, we are engaged in proffering quality assured gamut of Sizing Roller. This assortment is manufactured by our most experienced professional with the assistance of quality assured raw materials and machines. Adding to it, the proffered assortments are available at cost effective rates.
Approx. Rs 25,000 / Piece
We put forward a broad range of Merceriser Roller that is manufactured in adherence with the set industry standards using advanced technology and optimum quality components. In tune with international quality standard, we provide the entire range in various sizes and specifications, as per the requirement of our clients. Our quality controllers perform a series of test on various parameters, in order to ensure the quality of these rollers. Apart from this, clients can avail the entire range from us at industry leading rates.
Require less maintenance
Approx. Rs 15,000 / Piece(s)
We will contact you soon !
Advance Rubber Industries, Ahmedabad